R410a Refrigerant Vacuum Pump
Single Stage Vacuum Pump, Vacuum Pump, One Stage Vacuum Pump manufacturer / supplier in China, offering Vpa Series Single Stage Vacuum Pump (CE, RoHS) (VP2A), Multifunction Peeling & Crushing Machine E70-21, New Pneumatic Tools Air Body Saw Wt-7011 and so on.
3 CFM Double Stage Vacuum Pump Refrigeration Air Conditioning Tools
2. Technical Parameters
Free Air Displacement
1PCS/CTN, 2PCS/CTN, 2PCS/2CTN,
Shanghai or Ningbo
T/T, LC, Western Union
3. All-round display
Integrated design Integrate the pump with motor to make the whole product compact, light and attractive in design.
Anti-backflow design Prevent the oil from flowing back, to keep clear inside environment and enhance the stable function of the system.
Big Starting Torque Special design to guarantee motor starting normally even under low temperature in winter.
Low noise and vibration Elastomic coupling insert.
Environment friendly Special filter at the exhaust port to avoid oil spraying and spilling, elimating exhaust pollution of oil mist.
5. Exploded Diagram
1. Factory outlook
* Note: One Instruction Manual sent with One Product as default.
1.Keep the pump clean and prevent foreign matter from entering it.
2.Keep the oil level. Do not keep it running without oil.
3.Keep the oil clean. If it becomes dirty, muddy or has water or other volatile substances which affect limit vacuum the oil should be replaced. Before replacing the oil, start the pump and have it run about 30 minutes to make the oil thin and then stop it and let out the oil from the oil-outing mouth. Then have it run for 1-2 minutes with the gas-entering mouth open. During this time, add a small quantity of clean oil from the gas.Entering mouth so as to replace the remaining oil in the pump. Do it repeatedly. After making sure the pump is clean put on the oil-outing screw plug and then fill clean pump oil to the oil-level line from the oiling mouth.
4.If it is not in use for long, cover the oiling cap and exhaust cap and put it in a dry place. Meanwhile, damp proof and anti-rust should be considered.
5.If it needs removing and fixing is sure to have an experienced or professional technician one does it.
1.Do not pump inflammable, explosive and poisonous gases.
2.Do not pump gases which can corrode metals and can exert chemical changes with the pump oil.
3.Do not pump gases containing pellet dust and gases with plenty of steam.
4.The temperature of the pumped gas should not be over 80℃ and the environment temperature should be 5℃ - 6 ℃.
5.Do not use it as a compression or a convey pump.
6.Do not use or operate without oil.
7.Do not pull on the wire when unplugging from the outlet.
8.Do not put heavy weights on the wire to avoid being extruded.
9.Do not use when the plug or outlet if it is damaged.
10. Do not plug or unplug with your wet hands.
11.Unplug or switch off the machine when there is any kind of leak of coal gas.
WENLING HONGBAOSHI VACUUMEQUIPMENT FACTORY
Zhe jiang Address:East Industrial Zone Wenling Zhejiang
If the r410a refrigerant vacuum pump caters to your requirement, welcome to wholesale the quality and cheap vacuum pump from our factory. We're one of the leading manufacturers and suppliers in China. Welcome to check the price and quotation with us.