Wenling hongbaoshi vacuum equipment factory

Zhejiang Wenling Hongbaoshi Vacuum Equipment Factory is located in Taizhou, Zhejiang Province, which is a beautiful new developing seaside city with convenient transportation.

HBS Reciprocating Piston Oilless Environmental protection AC Vacuum Pump 120L/Min,-700mmHg, 450W, Vacuum Pump for Low Temperature

HBS Reciprocating Piston Oilless Environmental protection AC Vacuum Pump 120L/Min,-700mmHg, 450W, Vacuum Pump for Low Temperature

Buy wholesale direct from china hand air pump Product pictures The front of hand air pump The side of hand air pump The behind of hand air pump Part show Each Part Of hand air pump Exploded Drawing Of hand air pump Instructions 1.Maintenance 1.Keep the pump clean and prevent foreign matter from...

Send InquiryChat Now
Product Details

Buy wholesale direct from china hand air pump

Item HP-1400V
Voltage 220V/50Hz,15uF
Power 450W
Free air Displacement 7.2m3/h (120L/min)
Ultimate Pressure -700mmHg(-92Kpa)
Noise ≤56dB(A)
Temp Tange 5-40℃
Insulation grade B
Cold insulation ≥100MΩ
resistance (normal)
Dielectric strengh 1600V/50Hz 1min
no breakdown
Thermal protector automatic reset
130±5℃
Inlet&Outlet 1/4-19PT
port
Installation dimension L203*W112mm
(Mounting hole∮7mm)
Dimension L244*W128*H186.3mm
Reset Pressure 0KPa
Weight 8.6Kg

Product pictures

The front of hand air pump

2142815002_140142275.jpg

The side of hand air pump

2145690996_140142275.jpg

The behind of hand air pump

2145690992_140142275.jpg

Part show
Each Part Of hand air pump

141550541538.png

Exploded Drawing Of hand air pump

Instructions

1.Maintenance
1.Keep the pump clean and prevent foreign matter from entering it.
2.Keep the oil level. Do not keep it running without oil.
3.Keep the oil clean. If it becomes dirty, muddy or has water or other volatile substances which affect limit vacuum the oil should be replaced. Before replacing the oil, start the pump and have it run about 30 minutes to make the oil thin and then stop it and let out the oil from the oil-outing mouth. Then have it run for 1-2 minutes with the gas-entering mouth open. During this time, add a small quantity of clean oil from the gas.Entering mouth so as to replace the remaining oil in the pump. Do it repeatedly. After making sure the pump is clean put on the oil-outing screw plug and then fill clean pump oil to the oil-level line from the oiling mouth.
4.If it is not in use for long, cover the oiling cap and exhaust cap and put it in a dry place. Meanwhile, damp proof and anti-rust should be considered.
5.If it needs removing and fixing is sure to have an experienced or professional technician one does it.
2.Precautions
1.Do not pump inflammable, explosive and poisonous gases.
2.Do not pump gases which can corrode metals and can exert chemical changes with the pump oil.
3.Do not pump gases containing pellet dust and gases with plenty of steam.
4.The temperature of the pumped gas should not be over 80° and the environment temperature should be 5 - 6.
5.Do not use it as a compression or a convey pump.
6.Do not use or operate without oil.
7.Do not pull on the wire when unplugging from the outlet.
8.Do not put heavy weights on the wire to avoid being extruded.
9.Do not use when the plug or outlet if it is damaged.
10. Do not plug or unplug with your wet hands.
11.Unplug or switch off the machine when there is any kind of leak of coal gas.
Company information

HTB1TYVLHVXXXXXXaXXXq6xXFXXXR.jpg

The exhibition

HTB14QNKHVXXXXcTXVXXq6xXFXXXF.jpg

Why us

HTB1Jp5HHVXXXXbjXFXXq6xXFXXXp.jpg

Certification

HTB1JuFZHVXXXXbTXFXXq6xXFXXX1.jpg

If the hp-1400v piston oil-free dry vacuum pump caters to your requirement, welcome to wholesale the quality and cheap vacuum pump from our factory. We're one of the leading manufacturers and suppliers in China. Welcome to check the price and quotation with us.

Related Products
Inquiry